User manual

Obtain an IP address automatically(DHCP):

If your network supports a DHCP server (eg. router) select this option to have the IP address is assigned

automatically.

If you select Obtain an IP address automatically you should select Obtain a DNS Server address

automatically.

Use the following IP address:

Select this option when a fixed IP is required.

[IP address] Type the IP address of your camera

[Subnet mask] Type the subnet mask

[Default gateway] Type the default gateway

Always use the following DNS server address:

[Primary DNS IP address] Type the IP address of the primary DNS server

[Secondary DNS IP address] Type the IP address of the secondary DNS server, if necessary

HTTP port number

The default HTTP port number is 80.

Note: To obtain the addresses required please follow the procedure on page 13 of this manual.

The Y-cam Knight is set up to obtain the IP address automatically (DHCP) by default. Should you may wish to

assign the IP address manually, use the TCP/IP Setup page to enter the address details.

7.3 TCP/IP Setup