User manual

22
7.2 Wireless Setup7.2 Wireless Setup7.2 Wireless Setup (Adhoc)
7.22 The Y-cam Knight can also connect directly to a computer that has wireless network capability.
In order to view the Y-cam Knight directly from your computer you first need to configure the wireless
device in your computer according to the Y-cam Knight settings above. To do this follow the instructions
below:
1. On your computer click on “Start” then “Control Panel”.
2. Double click the “Network connections” icon then double click on the Wireless network connection icon.
3. Click “View Wireless Networks” and select “ycam” from the list. (If you do not see an the Y-cam connection, make
sure the camera is powered on and has the above settings then click “Refresh network list” on your computer)
4. Click “Connect”. You are now connected to the Y-cam Knight via a direct (Adhoc) connection.
Note: This method of connecting to the Y-cam Knight does not offer any wireless security.
Make sure you change the “Security mode” on both the Y-cam Knight and your computer for a
more secure connection.