User manual

7.21 The Y-cam Knight connects to the wireless network through IEEE802.11b/g standard and features

WEP and WPA Encryption.

[SSID] Type the ID of the wireless network you want to connect to using up to 32 ASC characters or

click Search to search for available networks.

[Mode] Infrastructure mode and Adhoc mode

Select Adhoc mode when the camera is directly connected to your computer.

elect Infrastructure mode when the camera is connected via an access point or router.

[Security mode] Select the type of security mode that your wireless network is using.

WEP64, WEP128, WPA-PSK or WPA2-PSK Example below shows WEP128bit encryption.

Key type] Select the WEP key type. Either in hexadecimal (Hex) or ASC characters.

Note: most routers provide WEP keys in Hex format.

[WEP key] Type the encryption key that matches that of your router.

Click Apply to save changes.

Note: These settings have to match those of your access point or router. Please consult your access

point or router manual on how to verify or modify these settings.

Ⅱ

Adhoc Mode:

Infrastructure Mode: S

Ⅱ

7.2 Wireless Setup (Infrastructure)