User manual

From the home page click settings and enter the administrator user name and password. Click on

Camera Setup under the title Camera to change the image and audio parameters of the camera.

[Image size] Three image resolutions available: 640 x 480(VGA), 320 x 240(QVGA), 160 x 120.

[Frame rate] Twelve options: 1/2/3/4/5/6/8/10/15/20/25/30 frames per second (fps).

The frame rate is automatically determined by the camera and this depends on the network bandwidth available at the time. This frame rate

setting imposes the maximum frame rate that the camera will transmit.

[Bit rate] Eight options: 64, 128, 256, 512, 768, 1024, 1536, 2048 (kbps).

The above three settings determine the image quality, however higher bit rates require greater bandwidth. Please select the appropriate

settings according to your connection speed and network traffic. If you are experiencing jerky video it may be necessary to decrease the bit

rate.

[Frequency] Two options: 50Hz & 60Hz. Set according to the mains frequency in the country of use.

For UK this would be 50Hz.

[Light level] Four options: Auto, Bright, Normal, Dark. If Auto is selected, camera will automatically

adjusts the brightness setting according to the light intensity of the area being monitored.

[Image rotation] Display images upside down.

[Microphone] Turn on/off the built-in microphone.

[Mic volume] Adjusts the sensitivity of the microphone from 0~14 where 0 is the lowest.

[Audio bit rate] Four options: 16, 24, 32, 40(kbps). Determines the quality of the audio being transmitted.

Click Apply to confirm your settings.

7.1 CAMERA SETUP

7.11 Camera setup