User manual

(1) Mute

1.1) Click Mute button to mute the audio.

1.2) Slide the slide block horizontally to adjust volume.

(2) Snapshot

Press the Snapshot button to capture a still image of the

camera view.

Click Save to store the snapshot on your computer, the file is

automatically assigned the data & time of the snapshot.

Press Cancel to exit.

(3) Zoom

Click on + button and the cursor turns to a magnifier. Move

the magnifier to the desired location and click on an image area.

Press - button to return to the normal view.

(4) Recording:

Press the Record button to record video and audio (if enabled).

This will save the file in ASF format on your PC.

(5) Recording options:

Click this button to set the recoding parameters. You can set

record path, video file size and select whether to start

recording automatically when motion is detected and the length

of the recording in seconds.

(6) Image size:

There are three Image Size options: [640x480], [320x240] and

[160x120]. Please note that this only changes the image size

being viewed not the image size the camera is transmitting

and/or recording. To change the transmitting/recording image

size please refer to section 7.1 in this manual.

1.1) Mute button

(2) Snapshot button

1.2) Slide block

(3) Zoom in/out button

(6) Image resolution

(4) Recording button

(5) Recording options