User manual

You can select one of the three ways to view video from the Y-cam Knight;

1. Input the assigned IP address of the Y-cam Knight in the Web Browser address bar (followed by a

colon and the port number if it is not 80)

2. Double click on the Y-cam Setup utility icon on the Desktop, then select the camera and click “Open”.

3. Click “My Network Places” in the Windows “Start” menu or “Control Panel” then double click on the

icon with the camera name you wish to open. (Only if UPnP is enabled)

Notes:

Through the above home page you can select the live view which will allow you to access the live

video transmitted by the camera, or settings to configure the Y-cam Knight. In both cases you will be

asked to enter your User Name and Password. The default User Name is admin and the default

password is 1234. It is recommended to change these in order to avoid unauthorised access to the

camera.

The general users assigned by the administrator are not allowed to enter the system settings interface.

Please see User Management section on page 28 for further details.

6.0 Y-cam Knight Live View