User manual

Assigning an IP address to the Camera with Y-cam Setup utility

[Refresh] Click Refresh to search for cameras on the local network.

[Setup] Select the required camera and click Setup to configure the network settings for the camera.

[Open] Select the required camera and click Open to access the camera via a web browser.

[Exit] Click Exit to exit the Camera Setup window.

Note: Select and double click one of the cameras from the Device list, to open the camera view via the web browser.

1. Launch Camera Setup program to detect cameras on the local network.

2. Click on “Setup” button and the following setup interface will pop up.

3. Enter a unique name for the camera, the location (optional) and leave the default port number as 80.

“Obtain an IP address automatically” and “Obtain DNS server address automatically” are selected by

default, if you are confident enough to enter your own settings, you can do so by selecting “Use the

following IP address” and follow the guidelines on the next page. If however you wish to leave the default

settings please skip to section 6.0

6. Double-click the Y-cam icon on the Desktop to launch the program. The Y-cam Setup utility should

automatically find your camera if it is correctly connected (See image below).