User's Manual

UPNP Setup
IP207W supports UPnP which is enabled by default. This function requires a Windows XP/Vista operating
system. It is a quick way to discover the IP207W on your network. Please make sure that the UPnP function
is enabled on your PC.
[UPnP] Enable or disable the UPnP function.
[Router external port] Using this port, automatically adds a port forwarding rule to a router via UPnP
protocol. Please note that not all routers support this function. Refer to your router manual for further details.
If select UPNP Enable, and set port range is 8150~8350, camera will ask router to add a port forwarding rule
automatically. In this rule, the internal port is camera default port 80, the external port is 8150, IP address is
camera's IP. Use this setting, users can visit the camera from Internet through the router with this URL
http://routeripaddress:8150.
If there are several cameras in Local Network, the first one which first be opened will use 8150 as external
port, and second one will use 8151, third one use 8152, etc. Every camera will remember its port, it will
preferentially use this port in next power on.
Click Apply to confirm your setting.
Click System at the top right of Settings page to show the System information. See figure below.
24