Operation Manual

86
5.3.7 Map settings
You can fine-tune the appearance of the Map screen. Adjust the map view to your needs,
choose suitable colour themes from the list for both daytime and night use, change the blue
arrow to a 3D car model, show or hide 3D buildings, turn track logging on or off, and manage
the visibility of Place markers (which Places to show on the map).
The map is always shown on the screen so that you can see the effect when you change a
setting.
Button
Description
Switch the map view between a 3D perspective view and a 2D top-
down view.
Tap this button to switch on or off the North-
up view when 2D map view
mode is selected. In North-
up mode, the map is rotated so that its top
always faces North.
Adjust the basic zoom and tilt levels to your needs. Three levels are
available.
When selected, the map zooms out to show an overview of the
surrounding area if the next route event (manoeuvre) is far. When you
get close to the event, the normal map view returns.
Switch between daytime and night colour
modes or let the software
switch between the two modes automatically a few minutes before
sunrise and a few minutes after sunset.
Select the colour scheme used in daytime mode.
Select the colour scheme used in night mode.
Replace the default position marker to one of the 3D vehicle models.
You can select separate icons for different vehicle types selected for
route planning. Separate icons can be used for car, pedestrian and the
other vehicles.
Show or suppress 3D landmarks, 3D artistic or block representations of
prominent or well-known objects.