Operation Manual

69
Tip!
Speed limits for lorries may not be available for all roads. It is advised to enter the
maximum allowed s
peed in your area for your vehicle instead of the maximum speed
your lorry is capable of.
Tip!
When you often use your vehicle with typical configurations of parameters (for
example
with or without a trailer that also affects the length, the height, the number of
axles and the weight), it is better to create different vehicle profiles for the typical
setups and change between the profiles instead of always modifying parameters.
4.2 Setting up waiting time at waypoints
In order to receive a better arrival time estimation and to be able to use time restrictions and
statistical traffic information for future legs of the route, you can enable this feature and
specify a waiting time for each stop on your route.
If you enable the feature as described below, the application will ask you to enter the time you
will spend at a stopover every time you enter a new destination.
1. If you are on the Map screen, tap
to return to the Navigation
menu.
2. In the Navigation menu, tap
, and then .
3. Tap
.
4. Tap
to enable or disable this option.
5. When finished, tap and hold
to return to the Map screen.