Manual

26
Basic Editing
The XYZrobot Editor provides a simple and effective method to create, edit and remove pose and
sequence entries.
The following section provides step-by-step instructions for creating complete pose and sequence
entries.
Creating a Pose
Before you open the XYZrobot Editor, it is necessary to connect the Robotic Arm and computer
through a USB cable.
The following procedure provides detailed instructions to allow you to create a pose:
1. Connect the Robotic Arm to your computer. Connect one end of a USB cable to the computer
(USB Type A), and the other end to the Robotic Arm (USB Type Mini-B).
2. Once connected, power up the Robotic Arm, see “Testing the Robotic Arm” in the Assembly
Manual.
3. Locate and open the XYZrobot Editor application.
4. From the toolbar, select Project > New.
5. Enter a new project name in the name field.
6. Click the Model drop-down field and select Robotic Arm.
7. Click OK to continue or Cancel to return to the previous menu.
8. From the toolbar, select Config > Port Setting to open the option window.
9. A list of available ports displays in the window. Select the port that is assigned to the connected
Robotic Arm.
10. Click Ok to continue.
Operations
03