Manual

23
Sequence Editor
1
2
4
3
5
6
7
8
9
12 11 10131415
No Item Description
1 Sequence list List the sequences.
2 Add Create a new sequence list.
3 Remove Remove the selected sequence.
4 Rename Rename the selected sequence.
5 Pose list List the pose entries for the selected sequence.
6 Delete Delete the selected pose from the sequence.
7 Move down Move the order of the selected pose down in the order.
8 Pose Click the drop-down menu to select a pose.
9 Delay (ms) Click the selector arrows to adjust the variable, or type a specific
number and press Enter to manually set a delay variable.
10 Move up Move the selected pose up in the order.
11 Add Add a pose action to the sequence entry.
12 Halt Initiate a stop command when a sequence is running.
13 Loop Initiate a continuous run command for the selected sequence.
14 Run Initiate a run command for the selected sequence.
15 Relax Stops the electric pulse signal to the smart servo; allows for manual
rotation of the rotor.
03
Operations