Manual

12
Setup Your Robotic Arm
02
Setup Your Robotic Arm
Requirements
The following list outlines prerequisites for the installation process.
1. Assembly the Robotic Arm; see the Robotic Arm Assembly Guide.
2. Download the Firmware from www.xyzrobot.com.
Overview of Installation Process
Review all instructions and information prior to starting the actual installation, to avoid hardware
damage, difficulty during installation, or personal injury.
The document is organized to give the reader a straightforward account of the installation process.
The sections are ordered sequentially as follows:
• Installing the XYZrobot Editor Software
• Installing Arduino Application
• Installing the Robotic Arm Firmware