Datasheet

soldering equipment needs! We believe that you will be more than satisfied with many
features and the versatility of your new soldering station. Please carefully read the
instruction manual prior to operation to maximize the advantages of using your new
soldering station.
WARNING: This appliance is not intended for use by children or other persons
without assistance or supervision if their physical, sensory or mental capabilities
prevent them from using it safely. Children should be supervised to ensure that they
do not play with appliance. Failure to observe the safety regulation will result in a risk
of life and limb. The manufacturer shall not be liable for damage resulting from
misuse of the unit or unauthorized alterations.
CAUTION:
REMEMBER, THE TIP IS HOT!
◆ Keep the soldering tip and heating element away from the body, clothes and
flammable material when in operation. Always replace the solder wand to its
original holder when not being use. The soldering tip and the heating element are
still remaining hot after being switched off. Ensure that you do not touch the
soldering tip and the heating element.
DO NOT WORK ON LIVE CIRCUITS
◆ Before working on any mains powered equipment, make sure that it is turned off,
and the mains plug is removed from the power point. You must not undertake
work on live parts.
DO NOT USE IF DAMAGED
◆ If the power lead becomes damaged or the soldering station becomes faulty,
discontinue use immediately. To comply with safety standards, the power lead
must only be replaced by authorized technicians as special purpose tools are
required. Only the technician is permitted undertake repairs. Use the original
replacement part only.
REMEMBER UNPLUG IN THE POWER CORD
◆ The station must be switched off and the power cord must be unplug in before
replacing the fuse in the P.C.B.
Caution: Soldering irons operate at high temperatures and can easily burn the
skins and/or objects. Do not touch the tip and heater at any time and to keep it a
safety distance from flammable materials while the unit is on or while being
cooling. Please allow a sufficient time for it to cool before changing tips or
servicing the unit!
PRODUCT DESCRIPTION
The LF-389D digital readout electronically temperature controlled soldering station