Owner's manual

Calibration in control standard (determining the cell constant) WQL-Cond
136
ba75822e01 03/2011
6.4 Viewing the calibration history
The last 20 calibration records are stored in the logger and can be recalled.
Proceed as follows:
1 In the Device menu, select the Set menu item, and select the
measuring mode for which the calibration history should be
displayed.
2 In the Device menu, click the menu item, Calibrate.
3 The calibration window appears.
4 Click the menu item, Calibration history. The program reads the
calibration data of the set measuring mode.
5 The calibration history with the data of the last 20 calibration
procedures appears. Use the arrows on the side to scroll up or down.