Owner's manual

WQL-Cond Commissioning

107

ba75822e01 03/2011

3 Commissioning

Note

z Normally, all screw joints of the logger housing can be opened and closed

by hand, without using any tools. If necessary, use a paper towel so you

can get a better grip on the parts.

z Insert the battery in a clean and preferably dry environment.

3.1 Inserting the battery

Note

The logger is powered by a 3.6 V lithium battery, size AA, as provided in the

scope of the delivery (see chapter 14 T

ECHNICAL DATA). Other batteries of the

same size such as alkaline manganese batteries do not provide the required

operational voltage.

Operating time, see section 12.3 B

ATTERY.

Fig. 3-1 Inserting the battery