User guide

PAGE 21
Wastewater
Goulds Water Technology, Bell & Gossett,
Red Jacket Water Products, CentriPro
OFF
CONTROL PUMP 1 PUMP 2
ON
AUTO
OFF
HAND
CB1 CB2
S1 S2
1212
1T 2T
L1 L2 N
120/230 VAC ➁
SINGLE PHASE
60 Hz
➁ FOR 120 VAC OPERATION,
USE TERMINALS L1 AND N,
JUMP TERMINALS L2 AND N.
PUMP
NO. 1
PUMP
NO. 2
J1➀
➀ FOR SEPARATE 120 VAC
CONTROL POWER SUPPLY,
REMOVE JUMPER (J1) FROM
TERMINALS (H) AND (L1).
CONNECT 15 AMP MAX.
PROTECTED 120 VAC SUPPLY
TO TERMINALS (L1) AND (N).
WITH THE NEUTRAL OF THE
SUPPLY TO (N).
R1
R2
C
L1
OFF
LEAD LAGALARM
TEST
MUTE
RESET
FLASHING
SONALERT
N
HL1N 12
3
4
56
7
8910
11
J2
DRY CONTACTS
OFF FLOAT
LEAD FLOAT
LAG FLOAT
(OPTIONAL)③
ALARM FLOAT
③ FACTORY WIRED FOR (3) FLOAT
OPERATION. FOR (4) FLOAT
OPERATION, REMOVE JUMPER (J2)
FROM TERMINALS (6) AND (8).
INSTALL LAG FLOAT ON
TERMINALS (5) AND (6).
ALTERNATOR SWITCH
PUMP 1
ALT
PUMP 2
ALTERNATOR SWITCH –
STANDARD ON ALL DUPLEX
PANELS, THIS SWITCH PROVIDES
OPTIONS FOR: ALTERNATE
PUMPS, USE ONLY PUMP 1 OR
USE ONLY PUMP 2. IT IS USED
WHEN A PUMP IS REMOVED
FOR SERVICE.
NOTE: Panel is not to be used with
pumps that do not include capacitors.
Duplex Single Phase Panel Layout – D10020