User guide

4 iLink - Configuration and Support Utility
iQuest (NZ) Ltd - PO Box 15169 HAMILTON Tel: [phone] - Fax: [phone] - Email: [e-mail]
6 CONFIGURING DATALOGGERS 34
6.1 Introduction 34
6.2 DS-CPU3 Configuration 34
6.2.1 DS-CPU3 Configuration Settings 35
6.2.2 Examples of Sensor Configurations for DS-CPU3 36
6.2.3 Transferring Sensor Configurations to the DS-CPU3 36
6.2.4 Saving the Sensor Configuration 36
6.3 DS-4483 Configuration 37
6.3.1 DS-4483 Sensor Configuration Settings 38
6.3.1.1 Retrieving the Datalogger Configuration 38
6.3.1.2 Transferring Configuration Settings to the DS-4483 38
6.3.1.3 Loading a Template into iLink 39
6.3.1.4 Saving a Template to file 39
6.3.1.5 Printing Template Information 39
6.3.1.6 Sensor Selection 40
6.3.1.7 General Setup 40
6.3.1.8 I/O Setup 41
6.3.1.9 Scaling Setup 42
6.3.1.10 Timing/Misc Setup 43
6.3.1.11 Alarms Setup 44
6.3.1.12 Output Setup 45
6.3.1.13 Comment Setup 46
6.3.2 Telemetry Communications Control Configuration 46
6.3.2.1 Control Cfg 46
6.3.2.2 Radio Cfg 47
6.3.3.3 Callback Cfg 48
6.3.3.4 Lookup Table 48
6.3.3.5 Misc Cfg 49
6.3.4 New Sensor Wizard 50
7 LOADING PROGRAMS 54
7.1 Loading An Application Program 54
7.2 Loading Kernel and/or Flash Executive Files 57
7.2.1 Loading a Kernel Program 57
7.2.2 Loading an Executive Program 58
8 DEVICE CALIBRATION 61
8.1 Device Calibration 61
APPENDIX A 63
System DO
®
Device RS232 Port Configurations 63
APPENDIX B 64
Sample Modem Configuration Settings 64
APPENDIX C 65
DS-4483 Lookup Tables 65
Table Size 65
APPENDIX D 66
iLink Auto Unload Mode 66
Manually Running an Unload Schedule 68