User guide

7
Dissolved Oxygen Transmitter
GB Oxix Manual 080915
FW: 841013-009, 846001-002, 841513-009
1. Introduction
Thank you for choosing the MJK Oxix
®
Dissolved Oxygen Transmitter. We
have done our utmost to design and manufacture a quality transmitter that
satisfies your requirements:
High performance optical sensor•
No calibration•
No spareparts needed in sensor's 10 year lifetime•
Air or water jet cleaning system is standard•
Measurements not affected by sunlight or dry environment•
Large, easy-to-read display with trend curve capability•
Multiple languages•
Built-in datalogger•
No moving parts, oxygen consumption or risk of poisoning•
Mounting accessories • (optional)
The Oxix
®
transmitter is easy to install, calibrate and put into service. How-
ever, read this manual first to get familiar with the Oxix
®
transmitter and all its
features.
The equipment must be handled and operated as instructed by the manufac-
turer, MJK Automation A/S to ensure stable operation and accurate measure-
ments.
You can always contact your local representative or the MJK hot lines for
advice and guidance:
Europe• Tel.: [phone] E-mail: [e-mail]
Denmark• Tel.: [phone] E-mail: [e-mail]
Norway• Tel.: [phone] E-mail: [e-mail]
Sweden• Tel.: [phone] E-mail: [e-mail]
Holland• Tel.: [phone] E-mail: [e-mail]
USA• Tel.: [phone] E-mail: [e-mail]
Australia• Tel.: [phone] E-mail: [e-mail]
Visit our web sites at www.oxix.dk and www.mjk.com to learn more about
MJK Automation, our other products and the people behind them.
Oxix
®
is a registered trademark of MJK Automation A/S, Denmark.