User guide

53
Multiple Pump Pump Protection... continued
Instructions
3. Error Reset Turning this control on will
enable the AQUAVAR controller to retry its
operation five times when a fault condi-
tion occurs. Turning the control to “off”
means that the AQUAVAR controller will
shut down the first time a fault occurs.
   •Press toadvancethedisplayto:
   •Usethe toselectthemodeyouwant.
Returning to normal operation:
4. Hold down the key for 2-3 seconds
until the display changes to:
   •Scrollpastthenextfewscreens(briefly
touch the key) until you reach:
5. Save the new settings by pressing the
at the same time until the display changes to:
After a moment, the screen will automatically return to the main menu start position.
6. Repeat steps 1 through 5 above for each of the other pumps in the system which
have suction switches or float switches.
Programming
ERROR RESET
Screen
SUBMENU ERRORS
t
t
SAVE ??? +
SAVE ??? SAVED
t
t
t
t
“Fatal” errors will always shut down the system the first time.
Note
*
*
*