Owner's manual

CXA000 12’ Swing Sampler w/Pole and Bottle

The CXA000 Swing Sampler is designed for collecting liquid samples from

a horizontal flowing stream such as a sewer. It allows collection from

various angles, including 90

. Different sizes of bottles/containers may be

attached to the bottle holder, allowing for a variety of applications. A 960

ml bottle is provided with the Swing Sampler and Global Water also offers a

500 ml bottle and corresponding snapper ring. The pole can be extended up

to 12 feet (3.66 m).

Assembly Instructions

To connect the pole to the

bottle holder:

1. Locate part B (on the

pole) and part C (on

the bottle holder).

2. Turn part B clockwise

into part C until it is

snug.

3. Use the supplied Allen

wrench to tighten the

Allen screw located in

the inner pole screw

threads of the bottle

holder.

Assembly is now complete

PAGE 1
CXA000 12’ Swing Sampler w/Pole and Bottle The CXA000 Swing Sampler is designed for collecting liquid samples from a horizontal flowing stream such as a sewer. It allows collection from various angles, including 90o. Different sizes of bottles/containers may be attached to the bottle holder, allowing for a variety of applications. A 960 ml bottle is provided with the Swing Sampler and Global Water also offers a 500 ml bottle and corresponding snapper ring. The pole can be extended up to 12 feet (3.66 m).