Owner's manual

USERS MANUAL
CHATTER™ DATA LOGGER
183
Appendix C
Setting the time on your PC
The time in your PC is used when you are setting the clock in your Chatter™ Data Logger. If you want the
Chatter™ Data Logger to use the correct time when it is logging data, you must have the correct time settings in
your PC.
Use the guide below to check your PC time settings
Click the button Start
Select Control Panel
Select the Date and Time control panel.
Start with the PC time, it should not be off by more than five
minutes.
Check the time zone, it must be set to your local time zone.
Change the time zone if necessary.