MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 Table of contents Introduction Prerequisites 3 ................................................................................................................................... 5 Computer requirements ................................................................................................................................................................... 7 Installation overview ....................................................................
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 Introduction meet your requirements. Install and use the system as instructed by the manufacturer, MJK Automation ApS, to ensure reliable operation and accurate measurements. You can always get in touch with your supplier or with an MJK support hotline for advice and guidance: Area Phone e-mail Europe +45 45 56 06 56 mjk@mjk.com Denmark +45 45 56 06 56 mjk@mjk.dk Norway +47 69 20 60 70 mjk@mjk.no Sweden +46 53 31 77 50 kontoret@mjk.
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 009 008 Removed My SQL, added Microsoft SQL server 2005 Express Edition and Microsoft SQL server 2008 R2 Express Edition Added section on Dr.
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 Prerequisites General Desktop operating systems such as Microsoft Windows 98 Microsoft Windows 2000 Microsoft Windows XP Microsoft Windows Vista Microsoft Windows 7 can NOT be used as a platform for This guide is based on a default installation of the selected version of a Microsoft Windows Server 2008 R2 If the server is part of an Active Directory domain, MJK Automation ApS recommends that the server is included only as a Member Server.
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 If the server is behind a firewall, make sure to allow access through these ports. Using the system Chatter Notification Engine recommends periodical backup of - at least - the database. Microsoft has made a guide on this topic, it can be found at http://technet.microsoft.com/en-us/library/ms175477.aspx Reservations Setting up a Microsoft Windows Server 2008 R2 can be done in so many ways that it is impossible to cater for them all.
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 Computer requirements Windows Server 2008 R2 MJK Automation ApS recommends a computer with the following specifications: Item Description Processor Intel Xeon 2,66 GHz or better Memory 4 GB Hard drives 2 each, 300 GB in RAID1 configuration Optical drive Must be able to read a DVD Monitor Minimum resolution 1024 * 768 pixels Network Standard Ethernet network card Uninterruptible Power Supply Must ensure a five-minute running time on battery, th
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 Installation overview It is important that all parts of the system are installed in the order listed below and in the manner specified in each guide.
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 System overview 9
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 10
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 11
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 Server settings Some of the specified settings can only be done by the user Administrator.
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 Dr. Watson This setting is optional but recommended by MJK Automation ApS. MJK Automation ApS recommends disabling Microsoft's Dr. Watson debugger. To do this, you must make a change in the Windows Registry. Using Registry Editor incorrectly can cause serious, system-wide problems that may require you to re-install Windows! Here Here 14 15 is a guide showing how to disable Dr. Watson. is a guide showing how to activate Dr.
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 Disable Dr. Watson Click the button Start type regedit in the text field Press Return on the keyboard- Locate and expand the registry key HKEY_LOCAL_MACHINE. Locate and expand the registry key SOFTWARE. Locate and expand the registry key Microsoft. Locate and expand the registry key Windows NT. Locate and expand the registry key CurrentVersion. Locate and right click the registry key AeDebug select Delete. Confirm deletion of the registry key.
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 Enable Dr Watson again CBS\Server2008R2\DrWatson DrWatson.reg Double-click the file in the folder. Click the button Yes Click the button OK.
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 Server network adapter This setting is optional but recommended by MJK Automation ApS. This section shows the changes to the servers Network adapter in order to prevent the server from powering it down It is advisable to get the necessary help and guidance from the local IT manager if your network adapter cannot be configured as described in this guide Click the button Start select Control Panel. Select the control panel Network and Sharing Center.
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 Select the Power Management tab Remove the check-mark in Allow the computer to turn off this device to save power.
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 Server Power Save This setting is optional but recommended by MJK Automation ApS. This section shows the changes to the servers Power Save order to prevent the servers hard disks from powering down when the screen saver is activated. Click the button Start select Control Panel. Select the control panel Power Options Click the shortcut Change when the computer sleeps.. Select Never in both Turn off the display and Put the computer to sleep.
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 Windows Services This setting is optional but recommended by MJK Automation ApS. This section shown the changes needed for some Windows services.
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 Find the service Windows Error Reporting. Double click the service name Change Startup Type to Disabled. Click the button OK Find the service Windows Update. Double click the service name Change Startup Type to Disabled.
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 Internet Information Services This setting is mandatory. Internet Information Services is not part of the default installation, but must be installed separately Click the button Start right-click Computer select Manage. Expand Roles in Server Manager. If Web Server (IIS) is already in the Roles Summary area, then Internet Information Services 7 is already installed.
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 Mark the Web Server (IIS) field in the Select Server Roles window Click the button Next Click the button Next Select ASP.NET in the Select Role Services window. Click the button Add Required Role Services The services necessary for Internet Information Services are added automatically.
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 Confirm that you want to install Internet Information Services. Click the button Install Wait while the installation continues The installation is done.
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 Windows firewall Incorrect changes of the Windows Firewall will affect the security of the internal network, to which the server is connected Click the button Start select Control Panel Select the Windows Firewall control panel Click the link Advanced settings Mark Inbound Rules Click the link New Rule...
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 Mark Port Click the button Next > Mark TCP Type 5000,5001 in the field Specific local ports Click the button Next > Mark Allow the connection Click the button Next > Click the button Next > 25
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 Name the new Inbound Role and type a description for later use Click the button Finish Close all windows, return to the desktop 26
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 Preparations server. It is: Change tme zone to UTC and set Windows Time Service to synchronize with a precise time-server. This part is optional, but is recommended by MJK Automation ApS. If the server already is synchronizing wit an accurate time source, this part is skipped. For time synchronization to work, an external firewall must allow outgoing UDP-traffic on port 123.
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 Windows Time settings This change is optional but recommended by MJK Automation ApS. server clock, therefore it should be as precise as possible. If the serves internal clock already synchronizes with a precise time-server, the skip this entire section The server must have a working internet connection in order to synchronize with an external time-server.
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 Select the Internet Time tab Click the button Change settings.. Mark Automatically synchronize with an Internet time server Select time.nits.gov in the drop-down Server Click the button Update Now Wait for the success-message.
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 Adobe Reader X This install is optional, but is recommended by MJK Automation ApS Adobe Reader X is used to show the accompanying manuals in PDF-format. System Software DVD in this location: CBS\Server2008R2\AdobeReader_X AdbeRdr1001_en_US.exe Double-click the file in the folder and wait for this window to appear Click the button Install Adobe Reader X is installed.
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 MJK Chatter system software Microsoft ASP.NET 2.0 AJAX Extensions 1.0 Here 32 is a guide showing how to install Microsoft ASP.NET 2.0 AJAX Extensions 1.0 Updates from Microsoft Update Here 33 is a guide showing how updates from Microsoft Update must be installed. Using Microsoft Update is optional, but recommended by MJK Automation ApS if the updates are done as described in this guide.
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 ASP.NET AJAX extensions The install file for Microsoft ASP.NET 2.0 AJAX Extensions 1.0 CBS\Server2008R2\ASP_AJAX_2 ASPAJAXExtSetup.exe Double-click the file in the folder and wait for this window to appear Click the button Next Mark I accept the terms of the License Agreement to accept the license agreement. Click the button Next Click the button Install Wait while the installation continues ASP.NET AJAX extensions are installed.
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 Microsoft Update This change is optional but recommended by MJK Automation ApS. MJK Automation ApS recommends updating the operating system from Microsoft Update according to the guide. The exact updates depends on the actual server configuration. Your server may install other updates than the ones shown below.
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 Wait for this window to appear. Click the button Install updates Wait while the installation continues. You may need to accept some license agreements, depending on which updates is selected Mark I accept the license terms Click the button Finish Wait while the installation continues. The update is done The server may need to be restarted Click the button Restart Now Wait for the server to restart.
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 Microsoft SQL server 2008 R2 Software. It must be purchased separately. Make sure the Microsoft SQL server 2008 R2 install-DVD is in the servers DVD drive and wait for this window to appear Select Installation in the left column Select New SQL Server stand-alone installation or add feature to an existing installation in the right column. The install guide checks which support programs must be installed.
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 Ready to install the necessary support programs Click the button Install Wait while the installation continues The necessary support programs are installed. Click the link for the Firewall Warning and read it. Click the button OK Click the button Next Select SQL Server Feature Installation Click the button Next Select the elements of Microsoft SQL server 2008 R2 to be installed.
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 The install guide checks which support programs must be installed. If Failed or Warning is shown in the upper part of the window, the causes must be found and the errors corrected. Click the button OK Select which database instance to install. Default instance is already selected. Do not change the name of this instance! Click the button Next Installation overview If anything but green check-marks is shown, the causes must be found and the errors corrected.
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 Click the Collation tab If the field Database Engine.shows Danish_Norwegian_CI_AS then don't change it. Click the button Next and continue at Click Windows Collation designator and sort order select Danish_Norwegian Mark Accent-sensitive Click the button OK Click the button OK Windows Authentication Mode is the default A user with rights to manage local databases must be added.
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 The install program checks if the parts of the database server chosen for installation can be installed. If Failed or Warning is shown in the upper part of the window, the causes must be found and the errors corrected.
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 Create en empty database The install file for a new, empty database is on the MJK CBS\Server2008R2\ChatterDB ChatterDB_008.sql Double-click the file in the folder and wait for this window to appear The name of the database server is in the field next to the arrow. Click the button Connect The script opens in Microsoft SQL Server Management Studio.
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 MJK Chatter Front-End service The server must be restarted during this installation. CBS\Server2008R2\FE_SQL Chatter-FrontEnd_011.msi Double-click the file in the folder and wait for this window to appear. Click the button Next End service Click the button Next Ready to install Click the button Next Wait while the installation continues The installation is done Click the button Close Copy this document: CBS\Server2008R2\FE_SQL FrontEnd_Service.exe.
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 C:\Program Files (x86)\MJK Automation \ Chatter - Front-End FrontEnd_Service.exe.config Answer Yes to overwrite the existing file Windows Service Click the button Start select All Programs select MJK AUTOMATION select Chatter - Front-End select Install FrontEnd for SQL Server Service. This windows closes when the installation is done.
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 Change Startup Type to Automatic (Delayed Start) Click the button OK Restart the server Click the button Start select Restart. Type a comment as to why the server restarts in Comment.
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 Wait a couple of minutes, then open this document: C:\Program Files (x86)\ MJK Automation\Chatter - Front-End Notification.log Check the three last lines. They must show the same content as in the image to the left, except for the date and time..
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 MJK Chatter Service Tool Software DVD in this location: CBS\Server2008R2\ServiceTool_SQL Chatter - Service_010_SQL.zip Right-click the file on the desktop select Extract all... Extract the file to a folder on the desktop, use the suggested location. Click the button Extract This window is shown when the extraction is done. Move the folder Chatter - Service to this location: C:\Program Files(x86)\MJK Automation The target folder will look like this.
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 Expand Roles, expand Web Server (IIS), mark Internet Information Services (IIS) Manager. Expand the entry with a name equal to the servers name, expand Sites. Mark Application Pools Right-click Application Pools select Add Application Pool Name the new Application Pool Chatter Select .NET Framework v2.0.
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 Expand Sites. Right-click Default Web Site select Add Application... Type Service in the field Alias Click the button Select...
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 Click the link Browse *:80(http) to s Service Tool Right-click this line if it shows in Internet Explorer. select Enable Intranet Settings Click the button Yes Click the button Compatibility View if Internet Explorer shows a green filed like this when the website is opened.
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 the server desktop. The Start menu shortcut is on the MJK CBS\Server2008R2\ServiceTool_SQL Chatter - Service Menu.zip Right-click the file on the desktop select Extract all... Extract the file to a folder on the desktop, use the suggested location. Click the button Extract This window is shown when the extraction is done. Leave this window visible on the screen.
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 The target folder should look like this Delete the file Chatter - Service Menu.
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 51
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 MJK Chatter interval editor this location: CBS\Server2008R2\ Chatter - Interval editor Copy this folder and its content to this location: C:\Program Files\MJK Automation The target folder will look like this. Software DVD in this location: CBS\Server2008R2\Chatter - Interval editor shortcut Chatter - Interval Editor.lnk Click the button Start select Programs Right-click MJK AUTOMATION select Open Software DVD to the folder MJK AUTOMATION.
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 Microsoft SQL Express 2008 R2 The install file for Microsoft SQL server 2008 R2 Express Edition CBS\Server2008R2\SQLExpress2008R2 SQLEXPR_x86_ENU.exe Double-click the file in the folder If Microsoft .NET 3.5 is missing, this window is shown. Click the button OK The installer-window select Installation in the left column select New SQL Server stand-alone installation or add feature to an existing installation in the right column.
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 Select which database instance to install. Named instance is already selected. Do not change the name of this instance! Click the button Next Select the User account, Microsoft SQL server 2008 R2 Express Edition will use. Click the button Use the same account for all SQL Server services Select NT AUTHORITY\NETWORK SERVICE in the drop-down Click the button OK Click the Collation tab If the field Database Engine.
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 Windows Authentication Mode is the default A user with rights to manage local databases must be added. Click the button Add Current User This gives manage local database rights to the server administrator Don't send error reports to Microsoft Click the button Next The installation is done If anything but green check-marks is shown, the causes must be found and the errors corrected.
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 Create en empty database The install file for a new, empty database is on the MJK CBS\Server2008R2\ChatterDB ChatterDB_008.sql Double-click the file in the folder and wait for this window to appear The name of the database server is in the field next to the arrow. Click the button Connect The script opens in Microsoft SQL Server Management Studio.
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 MJK Chatter Front-End service The server must be restarted during this installation. CBS\Server2008R2\FE_XPR Chatter-FrontEnd_011.msi Double-click the file in the folder and wait for this window to appear.
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 Service. This windows closes when the installation is done. Click the button Start right-click Computer select Manage Expand Configuration select Services select the tab Standard Find the Chatter - Front-End service. Double-click the service name. Change Startup Type to Automatic (Delayed Start) Click the button OK Restart the server Click the button Start select Restart.
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 Type a comment as to why the server restarts in Comment. The comment will be stored in the machine system log Click the button OK Wait five minutes after restarting the server Click the button Start right-click Computer select Manage Expand Configuration select Services select the tab Standard Find the Chatter - Front-End service.
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 MJK Chatter Service Tool Software DVD in this location: CBS\Server2008R2\ServiceTool_XPR Chatter - Service_010_XPR.zip Right-click the file on the desktop select Extract all... Extract the file to a folder on the desktop, use the suggested location. Click the button Extract This window is shown when the extraction is done. Move the folder Chatter - Service to this location: C:\Program Files(x86)\MJK Automation The target folder will look like this.
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 Expand Roles, expand Web Server (IIS), mark Internet Information Services (IIS) Manager. Expand the entry with a name equal to the servers name, expand Sites. Mark Application Pools Right-click Application Pools select Add Application Pool Name the new Application Pool Chatter Select .NET Framework v2.0.
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 Expand Sites. Right-click Default Web Site select Add Application... Type Service in the field Alias Click the button Select...
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 Click the link Browse *:80(http) to s Service Tool Right-click this line if it shows in Internet Explorer. select Enable Intranet Settings Click the button Yes Click the button Compatibility View if Internet Explorer shows a green filed like this when the website is opened.
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 the server desktop. The Start menu shortcut is on the MJK CBS\Server2008R2\ServiceTool_XPR Chatter - Service Menu.zip Right-click the file on the desktop select Extract all... Extract the file to a folder on the desktop, use the suggested location. Click the button Extract This window is shown when the extraction is done. Leave this window visible on the screen.
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 The target folder should look like this Delete the file Chatter - Service Menu.
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 MJK Chatter interval editor this location: CBS\Server2008R2\ Chatter - Interval editor Copy this folder and its content to this location: C:\Program Files\MJK Automation The target folder will look like this. Software DVD in this location: CBS\Server2008R2\Chatter - Interval editor shortcut Chatter - Interval Editor.lnk Click the button Start select Programs Right-click MJK AUTOMATION select Open Software DVD to the folder MJK AUTOMATION.
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 Google Maps API key This install is optional, but is recommended by MJK Automation ApS Google Maps is a service supplied by Google, Inc. MJK Automation ApS has no responsibility for the accessibility and accuracy of this service. Start Internet Explorer, go to: http://code.google.com/intl/da/ apis/maps/signup.html You need a valid Google account in order to use Google Maps.
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 Scroll to the bottom of the Google Code window, read the license terms. Check mark I have read and agree with the terms and conditions. Type either the servers fully qualified domain name or the servers public IP-address in the My web site URL . Click the button Generate API Key The key is displayed when it is created.
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 Update from earlier releases Updating - step by step This guide 70 shows how to do this. this guide this guide 72 this this this this this this guide this guide 72 this this this this 71. guide guide guide guide guide 71 74. 75. 76. 77. . guide guide guide guide this guide 71. this guide 72 this guide this guide this guide this guide this guide this guide 71. this guide this guide 69 73. 74 . . 76 . 77 . 75 75. 76. 77. 76 77 . . 77.
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 Which is the current release? How to determine the current release? system. CBS\Server2008R2\UpdateDB\CheckVersion \SQL CBS\Server2008R2\UpdateDB\CheckVersion \Express Copy the relevant folder to the serves desktop Open the folder on the desktop. Double-click the file CheckVersion.cmd A new document, Version.txt is created in the folder Open this document The database release is shown, see the arrow in the image to the right.
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 Update the Chatter Front-End service Click the button Start select All Programs select MJK AUTOMATION select Chatter - Front-End select Uninstall The windows closes when the service is removed. Click the button Yes Open this folder: C:\Program Files (x86)\MJK Automation Delete the folder if it exists: Chatter - Front-End service procedure depends on the database used. If you are using Microsoft SQL server 2008 R2 install using this guide 41 .
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 Update the Chatter Service Tool Open this folder: C:\Program Files (x86)\MJK Automation Right-click the folder Chatter - Service select Delete Close all windows, return to the desktop Tool depends on the database used. If you are using Microsoft SQL server 2008 R2 install using this guide 45 . If you are using Microsoft SQL server 2008 R2 Express Edition install using this guide 60. Service Tool.
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 Update the database from release 002 to release 003 MJK recommends that a verified backup of the database exists before this update is done! CBS\Server2008R2\UpdateBD\Database ChatterDB_002_to_003.sql Double-click the file in the folder and wait for this window to appear Click the button Connect The SQL-script opens in Microsoft SQL Server Management Studio.
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 Update the database from release 003 to release 004 MJK recommends that a verified backup of the database exists before this update is done! CBS\Server2008R2\UpdateBD\Database ChatterDB_003_to_004.sql Double-click the file in the folder and wait for this window to appear Click the button Connect The SQL-script opens in Microsoft SQL Server Management Studio.
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 Update the database from release 004 to release 005 MJK recommends that a verified backup of the database exists before this update is done! CBS\Server2008R2\UpdateBD\Database ChatterDB_004_to_005.sql Double-click the file in the folder and wait for this window to appear Click the button Connect The SQL-script opens in Microsoft SQL Server Management Studio.
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 Update the database from release 005 to release 006 MJK recommends that a verified backup of the database exists before this update is done! CBS\Server2008R2\UpdateBD\Database ChatterDB_005_to_006.sql Double-click the file in the folder and wait for this window to appear Click the button Connect The SQL-script opens in Microsoft SQL Server Management Studio.
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 Update the database from release 006 to release 007 MJK recommends that a verified backup of the database exists before this update is done! CBS\Server2008R2\UpdateBD\Database ChatterDB_006_to_007.sql Double-click the file in the folder and wait for this window to appear Click the button Connect The SQL-script opens in Microsoft SQL Server Management Studio.
MANUAL GB CHATTER BASE SYSTEM INSTALLATION 1303 Update the database from release 007 to release 008 MJK recommends that a verified backup of the database exists before this update is done! CBS\Server2008R2\UpdateBD\Database ChatterDB_007_to_008.sql Double-click the file in the folder and wait for this window to appear Click the button Connect The SQL-script opens in Microsoft SQL Server Management Studio.
1) The tissue in plants that brings water upward from the roots; 2) a leading global water technology company. We’re 12,000 people unified in a common purpose: creating innovative solutions to meet our world’s water needs. Developing new technologies that will improve the way water is used, conserved, and re-used in the future is central to our work. We move, treat, analyze, and return water to the environment, and we help people use water efficiently, in their homes, buildings, factories and farms.
