User Manual

APPENDIX “B”
REPLACEMENT PARTS LIST
Quantity
Part Number Part Name Packing Mech. Seal on
Sleeve
Mech. Seal on
Shaft
0-400-0* Mechanical Seal 2 2
0-910-0 Pipe Plug (Casing) 5 5 5
0-912-0 Pipe Fitting 3 (optional) 3 3
0-944-0 Spirol Pin (Shaft Sleeve) 2 2
0-950-0 Pipe Nipple 2 (optional) 2 2
0-952-0 Tubing & Connectors 2 (optional) 2 2
1-013-9 Seal Cage 2 (optional)
1-014-9 Gland, Packing 2
1-904-9 Cap Screw (Gland) 4
1-924-9* Packing 12 Rings
2-001-0 Casing, Lower Half 1 1 1
2-001-0 Casing, Upper Half 1 1 1
2-123-5* Gasket, Casing (Suction) 1 1 1
2-123-6* Gasket, Casing (Discharge) 1 1 1
2-904-1 Cap Screw (Casing) Varies w/pump size Varies w/pump size Varies w/pump size
2-916-1 Taper Pin 2 2 2
3-003-9* Casing Ring 2 2 2
3-007-0 Shaft 1 1 1
3-009-9* Shaft Sleeve 2 2
3-015-9 Nut, Shaft Sleeve 2 2
3-025-3 Housing, Inboard Bearing 1 1 1
3-025-4 Housing, Outboard Bearing 1 1 1
3-026-3* Bearing, Inboard 1 1 1
3-026-4* Bearing, Outboard 1 1 12
3-073-9 Stuffing Box 2 2 2
3-136-9 Deflector 2 2 2
3-177-9* Lip Seal 2 2
3-421-9 Set Collar 2 1
3-516-4 Locknut 1 1 1
3-517-4 Lockwasher 1 1
3-902-3 Set Screw 2 6 8
3-904-9 Cap Screw (Bearing Housing) 8 8 4
3-910-9 Pipe Plug (Bearing Housing) 4 4 1
3-911-1 Impeller Key 1 1 1
3-911-2 Coupling Key 1 1
3-914-1* O-Ring (Stuffing Box) 2 2 2
3-914-2* O-Ring (Casing Ring) 2 2 2
3-914-9* O-Ring (Shaft Sleeve) 2 2
3-915-1* Retaining Ring (Impeller) 1
3-943-9 Spirol Pin 4 4 4
4-002-0 Impeller 1 1 1
* Recommended spare parts.
60