Manual

MJK Automation A/S
Byageren 7
DK-2850 Nærum
Tel: [phone]
Fax: [phone]
2
M701GB/0106
Installation and connection
Pressure transmitter
The pressure transmitter is immersed in
the well. The pressure transmitter can
be mounted in a tube, and fastened at
the top end of the tube, by means of
cable fittings.
If the pressure transmitter is
mounted in a tube, it facilitates
cleaning and inspection.
PUMP CONTROLLER 701
Pressure Transmitter 7060 or 7070
Measuring range: 0 - 3 m: Pressure Transmitter
7060 / 7070 - 1413
0 - 10 m:Pressure Transmitter
7060 / 7070 - 1423
0 - 30 m:Pressure Transmitter
7060 / 7070 - 1433
Dimension: Type 7060: Ø 60 x 140 mm
Type 7070: Ø 22 x 150 mm
Output: 4 - 20 mA
Supply: 12 - 30 VDC
Accuracy: ±1 % (0 - 50 °C)
Temperature: - 10 … + 60 °C
Materials: House 7060: Polypropylene
House 7070: Steel AISI 316
Membrane: Steel AISI 316
Cable: Dimension: 2 x 0,5 mm
2
Insulation: PVC, outer layer of oil
resistant PVC.
Length: 12 m (35 m for 7060 / 7070-1433)
Enclosure: IP 68, waterproof, max. 3 bar.
Internal diameter
min. 65 mm.