Owner manual
5
M531-2-3GB0504
Panel Indicator type 532, 4-20 mA loop powered
General
Indicator type 532 is designed for panel mounting. The indicator is
serial connected in a 4-20mA current loop for indication of process
values such as level, pressure, flow, pH, temperature etc.
The indicator is loop powered from 4-20 mA signal with max.
voltage drop on 3,5 V.
The display can be background illuminated by connection to a
separate voltage source.
Specifications
Part number: 200120
Mounting and enclosure: Panel, IP 21
Supply: 4-20 mA
Voltage drop: Max. 3,5 V
Dimensions: (frame) 48 x 96 x 66 mm (H x W x D)
Panel cut out: 43 x 93 (-0, +1) mm (H x W)
Switch settings
Mounting
The indicator is placed in the panel cut-out and fastened with
the enclosed brackets.
Connection
Connect the terminals marked on the backside of the instru-
ment 4 - 20 mA signal - + and 4 - 2 mA signal in series with 4 -
20 mA signal. The back light is supplied separately with 12 - 35
V AC/DC on the terminals marked "Display back light".
6
M531-2-3GB0504
Panel indicator type 532, connected to pressure transmitter
and power supply, type 515 or PLC.
Panel indicator type 533, 230 V AC
General
Indicator type 532 is designed for panel mounting. The indicator
is supplied with 2 potential free limit relays, which can be
adjusted throughout the whole measuring range. Like all other
indicators, 0-point and span can be set to any value within the
measuring range. Se page 2.
Specifications
Part no: 200130
Mounting and enclosure: Panel, IP 21
Supply: 230 / 115 V AC
Fuse: 0,063 A MT (550031)
Transmitter supply: 24 V DC / 100 mA
Signal: 2- or 3-wire, 0 - 20 / 4 - 20 mA
Limit relays: 0 - 100 % of measuring range
Relay load: 48 V AC, 1A
Front dimensions: 48 x 96 x 130 mm (H x W x D)
Panel cut-out: 43 x 93 (-0, +1) mm (H x W)
DIGITAL INDICATORS DIGITAL INDICATORS
MJK Automation A/S
Byageren 7
DK-2850 Nærum
Denmark
mjk@mjk.com
www.mjk.com
MJK Automation A/S
Byageren 7
DK-2850 Nærum
Denmark
Tel.: +45 45 56 06 56
Fax: +45 45 56 06 46
Measurement
4mA readout
20mA readout
Decimal position
Measurement
on off
}
4 mA setting
on off
20 mA setting
on off
1
2
3
4
5
6
n
n
n
n
n
n
n
n
n