Owner's manual
© 2013 Flowtronex
74
Omron Touch-Screen Display
!
!
!
!
!
!
!
To recap the introduction to the calibration section:
!
·
On a station with one flow meter, channel 2 is used for the the primary flow.
!
·
On dual zone stations, the flow meter for zone 1 is on channel 5, and the flow meter for zone 2 is
found on channel 6. Channel 2 totals the two zones.
!
·
On triple zone stations, the flow meter for zone 1 is on channel 5, and the flow meter for zone 2 is
on channel 6, and the flow meter for zone 3 is on channel 7. Channel 2 totals the three zones.
!
2.13.2.1 Analog Flowmeter (Krohne)
!
Access the Register Access screen by pressing the Register Access key on the Main Menu.The
calibration screens are accessed from the Register Access screen by pressing the N Register Menu
touch key.