Owner's manual

Omron Touch-Screen Display

This screen also shows several features of the Master Control Interface (MCI) screens.

Press any touch key, such as Status Mode 1 and Graph, to view or edit parameters.

Use the up arrow key

(

▲

)

and the down

(

▼

)

arrow keys to view the next or previous screen

in a series.

Note:

When there are a series of screens, they are organized like the address list on a cell

phone. It may be faster to go in the opposite direction to reach a particular screen.

For example, if there are five screens in a series, from page 1 it is faster to use the

up arrow key to go to page 5 than it is to move down through four screens.

If available, tap on the Help key to open the help information screens.

Available on most screens, tap the Main Menu key to go directly to the Main Menu that acts as a

portal to other parts of the MCI application.

1.1 Main Menu

The Main Menu touch screen displays ten touch keys, your station's Job ID Number, and a number to

call for service. The features and characteristics of the different sections and screens are described in

the following sections under Basic Navigation.