Owner's manual

Omron Touch-Screen Display

Press the Lockout Settings touch key on the Register Access screen to open the first of four

Lockout Registers screens.

Lockouts are normally used to restrict the number of pumps that can be used within a given time

frame. They can be set up to run at different setpoints then the normal irrigation cycle.

N20:0 defines the Normal, PSI Setpoint. A common setpoint used is 120 PSI.

N20:3 defines the Lockout 1, PSI Setpoint. A common setpoint used is 120 PSI.

N20:5 defines the Lockout 2, PSI Setpoint. A common setpoint used is 120 PSI.

N20:1 defines the Max(imum) Combos under Normal conditions. Up to eight combos can be set