Owner's manual

Omron Touch-Screen Display

2.3 Change Combo Parameters

You can define combo setpoints and parameters by pressing the Register Access touch key on the

Main Menu and opening the Register Access screen.

Press the N20 & N21 Combo & Auxiliary Setpoints touch key on the Register Access screen to

open the first of three Combo setpoints screens.

Tap the value field next to any of these registers and the calculator/keypad pops-over the screen.

Enter or edit the value. (See also, Calculator/Keypad.)

– Enter the normal mode setpoint in PSI in the N20:0 register. A common setpoint is 120 PSI.

– Enter the maximum number of combos (1 to 8) normally used in the N20:1 register.