Owner's manual

Omron Touch-Screen Display

There are two Combo Tables, Combo Table 1-4 and Combo Table 5-8.

The Combo Table is actually a grid with the Combo numbers (Combo #1 to Combo #4) shown on the

right side and the pump numbers (PM and 1-8) shown on the top. The white boxes below the pump

numbers are enabling bits that show if the pump is enabled or disabled. As shown on the screen

above, a one (1) indicates the pump is enabled and a zero (0) shows the pump is not enabled in the

combo group.

For example, Combo #1 above has only the PM pump enabled. In Combo #2, only Pump #2 is

enabled and the PM pump is disabled for this combo. Combo #3 has Pumps #1,# 2, and #3

available and the PM pump is not enabled.

Optionally, press the Main Menu touch key to return to the Main Menu. (See also, Main Menu.)