Owner's manual

© 2013 Flowtronex
Basic Navigation
19
!
!
!
!
!
!
!
The values initially displayed for the flow totals are from the last time that this screen was accessed
and updated. This page is also used to view a second flow rate and total if your station is so equipped.
Both pages allow you to view the time and date of the last reset.
!
The Station Total Flow page 1 screen is read-only. Total Flow information shown is fed directly from
the PLC for the Primary Total Flow and Zone 2.
!
· Press Update touch key to update values from the PLC.
!
· Press the down arrow ( ▼ ) in the bottom right corner of the screen to display to the second Station
Total Flow screens.
!
!
!
The Station Total Flow page 2 screen displays read-only, Total Flow information fed directly from the