Owner's manual

© 2013 Flowtronex
Basic Navigation
15
!
!
!
!
!
!
!
You can edit the Time and Starts data if multiple pumps are used on the Run & Start Data page 3 , or
else Pump Not Used is displayed.
!
· Optionally, press Back to return to the Main Menu.
!
· Optionally, press the Reset All Log Data Key to reset the runtime totals.
!
· Press the up ( ▲ ) to display the previous Run & Start Data screen 2, or press the down arrow
( ▼ ) touch key to display the next Run & Start Data screen 4.
!
!
!
You can edit the Time and Starts data if multiple pumps are used on the Run & Start Data page 4 , or
else Pump Not Used is displayed.