Owner's manual

Omron Touch-Screen Display

Press the Reset All Log Data touch key to reset the "since reset values for Total Time and Total

Starts". The Total Time and Total Starts displays the cumulative totals.

Navigate the Run Data screens by tapping the up

(

▲

)

and go to Run & Start Data page 7, or

the down arrow

(

▼

)

to display the Run Data screen page 2.

You can edit the Time and Starts data on the Run & Start Data page 2 for Pump No. 2. If multiple

pumps are used, Pump No. 3 data is also shown, or else Pump Not Used is displayed.

Optionally, press Back to return to the Main Menu.

Optionally, press Reset All Log Data Key to reset the runtime totals.

Press the up

(

▲

)

to display the previous Run & Start Data screen 1, or press the down arrow

(

▼

)

touch key to display the next Run & Start Data screen 3.