Owner's manual

152

Omron Touch-Screen Display

– 00000110 is Pump 1 and Pump 2 and would appear as a 6.

– 00000111 is the PM Pump, Pump 1, and Pump 2 and would appear as a 7.

– 00001000 is Pump 3 and would appear as an 8.

B41:8 and B41:28 are only used for "clean-up" purposes, in case of an I/O change to the VFD

select switch. Normally, they are set to 0.

Optionally, press the Back key to display the B Register Access screen.

Optionally, press the Reg Menu key to return to the Register Access screen.

Press the Main Menu touch key to return to the Main Menu. (See also, Main Menu.)