Owner's manual

148

Omron Touch-Screen Display

Optionally, press the Back key to return to the Register Access screen.

Press the B90:xx Timed Pump Definitions touch key to display the Timed Pump Data screen.

B90:01, B90:10, and B90:11 are obsolete parameters and only used on older stations. These

parameters are always set to 0 on newer stations.

Pump object definition B60:16 tells the PLC which pump is a timed pump. Enter this number as a

hexadecimal value (see table below).

Click on a value to open the alphanumeric keypad. Note that this version of the keypad shows the

alphabetic keys, A through F.