Owner's manual

128

Omron Touch-Screen Display

Tap the value underneath a Pump # for a specific Combo number to change its state from a zero

(0) that disables it, to a one (1) enabling it. Note that the number one (1) is displayed in a green

block.

To disable a pump from a combo, tap on the green one (1). The system toggles the number from

a one to a zero disabling the pump from the Combo.

There are two instances when you might want to change your combos: when you add a pump, or when

changing the order that the pumps start. In the former example, you will need to go to your Combo and

Auxiliary Setpoints screen, and increase the number for N20:1 (Maximum Combo, Normal), as well as

the B60:xx Pump & Accessory Definitions screen and changing your objects. In the latter instance, you

may need to go to the Combo and Auxiliary Setpoints screen and increase the number for N20:1

(Maximum Combo, Normal).

Optionally, press the Main Menu touch key to return to the Main Menu. (See also, Main Menu.)

Optionally, press the Back key to go to the Combo Menu.

Press the down arrow

(

▲

)

to advance to page 1, Combo Table 1-4.

2.23.2 Access Combo Menu from the Register Access Menu

The Combo Menu may also be accessed from the B Register Access screen. Access the Register

Access screen by pressing the Register Access key on the Main Menu.