Owner's manual

© 2013 Flowtronex
How Do I?
117
!
!
!
!
!
!
!
· Tap the value field next to any of these registers and the calculator/keypad pops-over the screen.
Enter or edit the value. (See also, Calculator/Keypad.)
!
The following table gives you the bit sum to enter for each pump defined under registers N61:0 to
N61:3:
!
!
Pump #
!
Bit Sum
!
1
!
2
!
2
!
4
!
3
!
8
!
4
!
16
!
5
!
32
!
6
!
64
!
7
!
128
!
Example 1: You have three 75 HP main pumps, all of which can run on a VFD. You want all 3
pumps to be interchangeable and the pump with lowest hours should come on first.
You would set N61:0 to 14. This is the sum of the bits for the 3 pumps (2 + 4 + 8 from the table
above).
In this example, you would set your combos according to the following table: