Owner's manual

How Do I?

101

Press the Done touch key to return to the Start/Stop features screen.

2.15 Define My Custom Features

Two Custom Features screens (Custom Features Regs1 and Custom Features Regs2) are used to

define the special use registers available for these features. The two special use registers are N28:0 to

N28:9 and B27:0 to B27:0. The custom feature screens are not displayed unless these registers are

used and the PLC is able to communicate with these registers.

Access the Register Access screen by pressing the Register Access key on the Main Menu. Press the

N Register key on the Register Access screen and display the N Register Access screen.