User guide
24
Pressing the Menu button from the main screen
provides access to the menu system.
Figure 20: Menu
Access to the main functions of the controller is
available from the menus.
Figure 21: Totals
TOTALS: provides access to the Flow totals
(optional flow meter required) and pump hour
meters.
Figure 22: Pump Control
PUMP CONTROL: Allows access to pump start/stop
parameters for station tuning.
START SETTINGS. Select combo and parameters
to set via buttons at top of screen. Pressure is in
reference to set point. Flow rate is used for Flow
Start systems.
Figure 23: Stop Settings
STOP SETTINGS: Pressure is in reference to set
point, flow rate is used when flow stop is
required/configured.
Figure 24: Pump Control, Combo Selection
F3 allows user to change the combo being
adjusted. Note the combo number being adjusted
is shown in the black box on the right-hand side of
the screen.