Use And Care Manual

Phone: [phone] | Email: [e-mail] | Address: 315 - A Industrial RD Summerville, SC 29483
English
Support: Eccotemp.com/help-desk Shop Online: Eccotemp.com/products Store Locator: Eccotemp.com/locator
7
TROUBLESHOOTING
Vibration induced by sea conditions or transporting can cause plumbing or pump hardware
to loosen. Check for system components that are loose. Many symptoms can be resolved by
simply tightening the hardware. Check the following items along with other particulars of your
system. For more help with troubleshooting and installation please visit support.eccotemp.com.
Failure to prime – motor
operates, but no pump
discharge
• Restricted intake or discharge line.
• Air leak in intake line
• Debris in pump
• Punctured pump diaphragm (pump leaks)
• Crack in pump housing
Motor fails to turn on • Loose wiring connection
• Pump circuit has no power
• Blown fuse
• Pressure switch failure
• Defective motor
Pulsating ow • Restricted pump delivery. Check discharge lines,
ttings and valves for clogging or under sizing.
Pump fails to turn o after
all xtures are closed.
• Empty water tank
• Insucient voltage to pump (low battery)
• Punctured pump diaphragm (pump leaks)
• Discharge line leak
• Defective pressure switch
Low ow and pressure • Air leak at pump intake
• Accumulation of debris inside pump and plumbing
• Worn pump bearing (excessive noise)
• Punctured pump diaphragm (pump leaks)
• Defective motor
10ECF
½” Barbed
Adapter
20ECF
½”- Barbed
Adapter
30ECF
½” Threaded
Adapters
40ECF
Sediment Strainer
50ECF
Red/Black (+/-)
clips
REPLACEMENT PARTS
To order please visit www.eccotemp.com or call 1-866-356-1992.