Instructions

6
6
6
6
2.2
2.2
2.2
2.2 Important
Important
Important
Important Safety
Safety
Safety
Safety Instructions
Instructions
Instructions
Instructions
And always use your code reader as described in the user ’ s manual,
and follow all safety messages.
Do not route the test cable in a manner that would
interfere with driving controls.
Do not exceed voltage limits between inputs specified in
this user ’ s manual.
Always wear ANSI approved goggles to protect your eyes
from propelled objects as well as hot or caustic liquids.
Fuel, oil vapors, hot steam, hot toxic exhaust gases, acid,
refrigerant and other debris produced by a malfunction engine can
cause serious injury or death. Do not use code reader in areas where
explosive vapor may collect, such as in below-ground pits, confined
areas, or areas that are less than 18 inches (45 cm) above the floor.
Do not smoke, strike a match, or cause a spark near the
vehicle while testing and keep all sparks, heated items and open
flames away from the battery and fuel / fuel vapors as they are highly
flammable.
Keep a dry chemical fire extinguisher suitable for
gasoline, chemical and electrical fires in work area.
Always be aware of rotating parts that move at high
speed when an engine is running and keep a safe distance from these
parts as well as other potentially moving objects to avoid serious
injury.
Do not touch engine components that get very hot when
an engine is running to avoid severe burns.
Block drive wheels before testing with engine running.
Put the transmission in park (for automatic transmission) or neutral
(for manual transmission). And never leave a running engine
unattended.
Do not wear jewelry or loose fitting clothing when working
on engine.
Make sure to turn off ignition before connecting or
disconnecting the code reader.