Instructions

ManualsBrandsXXL Tech ManualsCar & BicycleXXLTECH NX200 OBD II / EOBD Diagnostic Scanner

Table Of Contents

√

√ To view information of other control unit quit current test and

select another module .

5.1

5.1 Reading

Reading

Reading DTCs

DTCs

The

Read

Read Codes

Codes

function is used to read DTCs (stored codes),

which are used to help identify the cause of a trouble or troubles

with a vehicle, and pending codes from the vehicle ’ s control

modules.

√

√ When emission-related or drivability fault occurs the control

module illuminates the malfunction indicator lamp (MIL).

√

√ Pending Codes are also referred to as continuous monitor or

maturing codes that indicate intermittent faults. If the fault

does not occur within a certain number of drive cycles

(depending on vehicle), the code clears from memory. If fault

occurs a specific number of times, the code matures into a

DTC and the MIL illuminates or blinks.

√

√ This function can be performed with KOEO or KOER.

To read codes from vehicle control modules:

1. Press the YES/NO

YES/NO

YES/NO key to start diagnosis from home screen.

2. Use the SCROLL

SCROLL

SCROLL key to select Read

Read

Read Codes

Codes

Codes from

Diagnostic

screen.

3. Press the YES/NO

YES/NO

YES/NO key to confirm.

Diagnostic Menu

Read Codes

Clear Codes

Datastream

Freeze Data