User Manual

F
F
F
F
M
M
F
F
F
F
Moulded
splitter
Moulded
splitter
M
Powerwires
(ACC)
+
M
M
+
Camera
Mirror
6 Metres
(Optional front camera)
(Red wires can
be used for
additional
accessories )
Powerwires
(Reversing light)
The Clip on mirror design securely mounts on the existing rear
view mirror in the vehicle by expanding the clamping arms at the
back. The video signal is transferred from the camera to the
Mirror Display via an RCA cable that will need to be run through
the boot, through the passenger compartment to the mirror
displays wired loom run under the dash. From there the power
and video signals are sent directly to the display. At the rear of
the car the camera is powered directly from the reversing tail
light. Priority is the AV2 input.
3. INSTALLATION DIAGRAM
4