User's Manual

Menu ① Menu ②

Note: If the matching refers to clamp oximeter is basic, not equipped with parameter setting

function

Detailed descriptions of product functions:

1. Display Type：OLED display

2. SpO2：Measurement range：70%～100%

Accuracy：80%～100%:±2% (Including 80%);

70%～79%: ±3% ;

Below 70% no requirement;

Resolution：1%

3. PR：Measurement range：30BPM～254BPM

Accuracy：≤100BPM ,±1BPM

＞100BPM ,±2BPM

4. Parameters of LED probe

wavelength

radiation power

RED

660±5nm

1.8mW

940±10nm

2.0mW

This parameter can be especially useful to clinicians.

5. PI index：measurement scope：0~20 （optional）

6. Power： two AAA 1.5V alkaline batteries

7. Automatic standby：the product shuts off by itself when no finger is in the product about 8

seconds

8. Automatic start up: every 5 s instrument will automatically detect the signal, after the hole with

my finger, timely automatically boot;(optional)

9. Gravity sensing function: finger movement, the screen display will change with the gravity

sensing changes (optional)

10. Dimension：58mm×36mm×33mm

11. Operation environment:

Temperature: 5 ℃ ~ 40 ℃

Humidity: 15% ~ 80%,no condensing

Atmospheric pressure: 70kPa ~ 106kPa

Transport, storage environment:

Temperature: -10 ℃ ~ 40 ℃

Humidity: 10%~ 95%,no condensing

Atmospheric pressure: 70kPa ~ 106kPa, non-corrosive gas and well-ventilated

environment.

12. Declaration：EMC of this product comply with IEC60601-1-2 standard.

13. This equipment has no alarm function.

14. Data averaging and signal processing delay the display and transmission of SpO2 data.

The date update period :＜12S

15. About 30min required for oximeter to warm from the minimum storage temperature between

uses until it is ready for intended use