User Manual

2). A short click on the reset button behind the chime(refer to Picture.5), and the LED indicator will flash
blue, indicating the device is in pairing mode.
3). Tap “ ” button in the APP (refer to Picture.4), and the doorbell will send a wireless pairing
signal to the chime. Pairing succeeds and the indicator on the Chime will be in solid blue.
All set! Congratulations! You can push the doorbell button to test the result.
- 7 -
Unbind
Select ringtone
Volume control
Enter into Settings->Wireless Chime, there are 4 ringtones available (refer to Picture.4).
Drag the Ring Volume bar to control the volume level for the chime (refer to Picture.4).
1. Press and hold reset button on the chime for about 5 seconds till the indicator flashes blue twice, and
the chime will be restored to factory default.
2. You can also tap on “ ” (refer to Picture.4) in the App to release the connection between
the doorbells and the wireless chimes.
Night Vision
Wireless Chime
Power Management
Automatic
BasicFunction
Host Leaves Message
1). Tap on “···” and enter into Settings-> Basic function, select Wireless Chime page.(refer to Picture.4)
Pair with doorbell
Picture.2 Picture.3
Picture.6
Picture.5
Picture.1
Picture.4
Wireless Chime
Middle
Chime Pairing
One-button untie
Chime Pairing
One-button untie
Ring Volume
Chime Reminder
Delete Device
Device Share
Device Information
Basic Function
Alarm Setting
Device Version
SD Card
Cloud Storage Service
Settings
Receive Notifications
Reset
Indicator