Owner Manual

Screw in the connector piece inside the shower head base. Attach the shower
head and screw into place.
Screw in the faucet piece. Make sure the spigot part where water comes
out is facing downward.
Screw in the green gasket piece into
the faucet.
Attach the shower head assembly to
the shower body. Tighten securely.
1
Connect the two shower body pieced and
tighten them securely.
Mount the shower base to concrete slab
or wood base with four bolts, nuts and
gaskets. Using a Hex key and wrench.
Scan the QR code above to
watch the full assembly video.