Use and Care Manual
3
WARRANTY RULES AND PRECAUTIONS
IMPORTANT! YOUR WARRANTY IS VOIDED IF: A. You do not operate the Auger Drill with the proper 25:1
fuel mix in the fuel tank. DO NOT run the engine with an improper fuel mix, low or no fuel mix. Running the
engine with an improper fuel mix, low or no fuel mix, can permanently damage the unit. B. You fail to operate
the Auger Drill with the proper amount of SAE 80-90 gear oil in its Gearbox. DO NOT run the Auger Drill
with low, or no gear oil. Running the Auger Drill with low or no gear oil can permanently damage the unit.
C. Maintain labels and nameplates on the Auger Drill. These carry important information. D. Always wear
safety equipment. When operating the Auger Drill, wear ANSI approved safety impact eye goggles, hearing
protection, heavy duty work gloves, sturdy steel-toe boots and head protection.
CARBON MONOXIDE PRECAUTIONS
This Auger Drill is designed for outdoor use only. DO NOT operate this drill in indoor, closed or poorly
ventilated areas. When running, the engine of this product produces carbon monoxide, a colorless and
odorless toxic gas that, when inhaled, can cause serious personal injury or death.
FIRE AND EXPLOSION PRECAUTIONS
Gasoline fuel and fumes are ammable and potentially explosive. Use proper fuel storage and handling
procedures. Have multiple ABC class re extinguishers nearby when using this power tool. Keep the Auger
Drill and surrounding areas clean and dust free at all times.
1. If oil or fuel spills occur, they must be cleaned up immediately. Dispose of uids and cleaning materials as
per any local state or federal codes and regulations. Store oil rags in a covered metal container.
2. DO NOT store fuel or other ammables near the Auger Drill.
3. DO NOT smoke or allow sparks, ames or other sources of ignition around the Auger Drill.
4. Keep grounded conductive objects such as tools away from exposed, live electrical parts and connections
to avoid sparking or arcing. Failure to do so could ignite fumes or vapors.
5. DO NOT rell the fuel tank while the engine is running or while the engine is still hot. DO NOT operate the
Auger Drill with any known leaks on the fuel system.
6. Use only manufacturer recommended fuel and oil.
7. Prior to performing service, maintenance or cleaning procedures, allow the engine to completely cool.
Then, remove the spark plug from the engine.
8.DO NOT alter or adjust any part of the Auger Drill or engine that is assembled and supplied by the
manufacturer.
CHEMICAL PRECAUTIONS
1. Avoid contact with hot fuel, oil and exhaust fumes.
2. Avoid body contact with fuels, oils and lubricants used in the Auger Drill and engine. If swallowed,
seek medical attention immediately. DO NOT induce vomiting if fuel is swallowed. For skin contact,
immediately wash with soap and water. If fuel gets in the eyes, immediately ush eyes with clean
water.
WARNING: This product contains or, when used, produces a chemical known to the state of California
to cause cancer and birth defects or other reproductive harm. (California Health and Safety Codes
25249.5, et seq.)
NOTE: This item does not meet California CARB requirements and is not for sale or use in California.
IMPORTANT SAFETY INFORMATION