Installation Guide

OPERATION

NOTICE

When the heat function is used for the first time, a slight odor may be

present. This is normal and should not occur again unless the heater

is not used for an extended period of time.

BUTTON ACTION / FUNCTION INDICATION / RESULT

ON/OFF

1. Press to turn on flame effect and

enable heater.

Heater switches will not work unless

this switch is turned on.

2. Press again to shut off the power to

all functions.

1. Flame effect turn on.

The heater is now enabled.

2. Power lights, heaters, and

flame effect turn off.

LOW

HEAT

1. With power turned on, press to turn

on low heat (750W).

Low heat must be on to use high heat.

2. Press again to turn off low heat.

1. Heater and fan turn on low

(750W).

2. Low heat and fan turn off.

Flame stays on.

HIGH

HEAT

1. With power and low heat turned on,

press to turn on high heat (1500W).

Low heat must be on to use high heat.

2. Press again to turn off high heat.

1. Heater and fan turn on high

(1500W).

2. High heat and fan turn off. Low

heat and flame stay on.

PREPARATION

 Remove all parts and hardware from the carton and place them on a clean, soft,

and dry surface.

Make sure all parts are dry, and the power cord and plug are not damaged.

See IMPORTANT SAFETY INFORMATION on pages 2 and 3.

Switch

Location

Note: Feet located on bottom are adjustable.

Adjust to the height that you want before using.