Manualshelf

Use and Care Manual

ManualsBrandsXtremepowerUS ManualsOutdoors15,000 Gal. In-Ground Pool Salt Water Chlorine Generator Chlorinator System with Flow Switch and Salt Cell
11121314151617181920
12
OPERATION
NOTE: Wire the pump directly to the time clock—do not use the SPS as a junction box.
Bonding:
A lug used for bonding is attached to the bottom of the SPS enclosure (see diagram below). The SPS must
be bonded with an 8 AWG copper wire (6 AWG Canada) to the pool bonding system.
Electrolytic Cell and Flow Switch:
The electrolytic cell and ow switch cables are terminated with connectors that plug into the SPS for easy
attachment and removal. The door of the SPS must be open to access the cell cable connector. The ow
switch plugs into a connector (similar to a telephone jack) located outside, on the bottom of the enclosure.
Refer to the diagram below for the location of these connections.